Proudly display your patriotism while sailing the high seas with this deluxe United States yacht ensign flag. Yacht ensign design identifies your yacht's nationality to other seafarers. Durable nylon resists fading. Made in the USA.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everyone I'm Ellen here at etrailer.com. Today, we're taking a look at the tailor-made deluxe sewn yacht insignia flag. This is going to be a great option for those of us who are traveling in American waters. And we just want to show off our yacht flag, or if we're in international waters and we want to signify that we are an American boat on our yacht. So it's going to have our embroidered 13 stars and the anchor with rope in our Canton, and then the 13 stripes, with the alternating red and white, each of those stripes is an individual strip of material that is sewn into place. And our design on the Canton is an embroider design.
So it looks really nice and it should last for a long time. It's made out of a nylon material, so it shouldn't fade or get damaged in the sun at all.The one thing that they do recommend is that whenever you're done flying it, that you let it dry and then fold it up once it's dry, rather than try to put it away wet, since it can get a little bit moldy or mildewy over time. And if you're in any kind of high wind situation, like going through a storm, you also want to reduce your flags so that you don't have any fraying at the fly end. As far as the size of the flag, it's roughly 30 by 48 inches. Whenever I actually measured it, it was a little bit different than that.
If we go from the very end of the Halyard to the fly end, it's about 49 and a half inches. If you we're actually to stretch this out, it's probably closer to 50 inches. If we go from the inside of that seam there, the white part of the Halyard, it's actually closer to that 48 Mark, about 48 and half.And then top to bottom it's about 29 or excuse me, 28 and a half inches. So roughly that 30 by 48 Mark. All the stitching looks really nice, it looks just as good on the reverse as it does on the side.
So they flip it over, you can see that design still looks good. There's no loose ends of that embroidery or anything. They've done a nice job of making that look really good. And it should be clear again, either way. You have it.
No worries about fading over time. Now this is made in the USA, and it also has the brass grommets here to prevent any kind of ripping or tearing at the Halyard. The fly end has a four hem or four stitched hem. So we'll have that reinforced there. So it's going to reduce any kind of fraying at that fly end.If you need a flagpole to go with this, we have a lot of options available here at etrailer.com, including clips to get that in place and all the other accessories to go on your boat from tailor-made that's going to do it for our look at be tailor made the deluxe sewn USA vote flag.Hope this video has been helpful and definitely check out those other accessories right here at etrailer.com. Thanks for watching.
Average Customer Rating: 4.7 out of 5 stars (228 Customer Reviews)
Proudly display your patriotism while sailing the high seas with this deluxe United States yacht ensign flag. Yacht ensign design identifies your yacht's nationality to other seafarers. Durable nylon resists fading. Made in the USA.Great workmanship and fine stitching.
They advertise these as boat flags. I use them on my snow plow one on each side as edge markers. It’s just a snow plow for my pick up but I like having the flags on there and every year I have to replace them under normal circumstances but with these flags, I do not have to replace them this year after year on the plow. They look great, and they’ve held up well.
Quality flag and pole setup
I've spent the past 5 months, completely refurbishing a 1958 Arkansas Traveler 14ft alum. V-hull boat and a 1988 Holsclaw Bros trailer. During that time I've placed at least a half dozen orders from etrailer, as they simply have a vast variety of items and and their website is fantastic, easy to use and their deliveries are prompt and efficient. This flag was the last item I added to this project and being retired military, I think it dressed up the vessel beautifully and I can't wait to see it waving in the breeze during the fall fishing season here in NH!
The product was packaged well and was exactly as described.The shipping was delivered one day after the projected date, but I will hold the USPS responsible for that.
Have had this product, flag for one year and it is doing great. Mounted on our Skiff no issues with mounting or fade so far.
Exactly what I wanted for my SxS.
We live on a 540 acre all sports private lake in the state of Michigan. Instead of flying the American flag like others along the shore line we are flying our last name of Seymour spelled out. Not sure how many boaters that cruise by know what it says, but we do! And we get a lot of compliments on these flags. Thanks
Perfect fit for my boat!!!
This flag looks to be made well, and is very bright, which I think is great! However I have not used it as of now so I'm not sure how durable it is. The only thing that disappointed me with this order is that it took so long to receive it. I ordered another flag after I ordered this one and received it in a matter of days not weeks like this order.
Well.made for the price
Etrailer shipped my order promptly, quality of products was excellent and they followed up upon my receipt of the order to be sure all was well.
A very positive experience indeed
Not made in the USA complete false advertising package clearly stated Made in China. Send me a made in the USA flag
The flag arrived as described and in good condition.
The material is of decent quality. The image is good but could be much better. My disappointment is that the image is only readable on one side of the flag. The other side is like looking at everything backwards, words and all. Most flags are readable on both sides. The colors are good and only time will tell if it lasts.
It only lasted a few months
I had a taylor made pirate flag on my boat for ten years. Same one at that. Iget my new one and the first outing it ripps up. The reason i went with Taylor was because of the years my old one lasted. I dought this will last to the end of the year.
I recently ordered a flag for my pontoon boat and I cannot say enough good things about the friendly, customer-service oriented folks like Carol C with whom I've dealt. The quality of the flag and attachments were first class and add tremendously to the boat on the water.
In the immortal words of H.L. Mencken, "Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin slitting throats." This is the perfect flag to hoist.
I forgot to remove this when I shrinked wrapped my boat still perfect no fading yet it’s been over two years it’s flying on my bow in excellent condition with all this hot sun !! I amazed
I recently needed a small American flag with grommets and after a little searching found the perfect size at etrailer. It came when it was promised and was exactly what I had purchased!
Received what I ordered when it was pro mised.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.